AR40.20-P-0200FB | Performing chassis alignment check | 30.3.98 |
MODEL 210
with CODE (979) Special protected version
with CODE (Z04) Light armor plating
with CODE (Z06) B6 plating
| Measuring, adjusting | ||
1 | Drive vehicle onto electronic measuring system | Measuring system has to be approved by Mercedes-Benz. | |
Pay attention to general information for checking chassis alignment. | |||
2 | Release rotating and sliding plates | ||
3 | Insert brake pedal winch at brake pedal | | |
4 | Attach Mercedes-Benz quick-clamp holders | ||
5 | Attach measuring heads and adjust | ||
6 | Perform initial measurement | ||
7.1 | Check vehicle level at front and rear axles, adjust if necessary | With Mercedes-Benz measuring device | |
7.2 | Check vehicle level at front and rear axles with electronic inclination measuring equipment, adjust if necessary | With electronic inclination measuring equipment | |
8 | Check toe-in of rear wheels and adjust | ||
9 | Check camber and caster at front axle and adjust | ||
10 | Check camber at rear axle | ||
11 | Check toe-in of front wheels and adjust | ||
12 | Check toe-out on turns | ||
13 | Perform final measurement | ||
14 | Take off measuring heads | ||
15 | Take out brake pedal winch | ||
16 | Drive vehicle off the measuring system | ||
17 | Secure rotating plates |
000 589 18 31 00
Brake pedal winch
Referenced documents
- ar4020p0201fb General information on chassis alignment check
- ar4020p0230fb Attaching Mercedes-Benz quick-clamp holder
- ar4020p0300fb Checking vehicle level at front and rear axles
- ar4020p0301fb Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary
- ar4020p0322fb Checking and adjusting front axle camber and caster
- ar4020p0323fb Check and adjust front axle toe-in
- ar4020p0325fb Check toe-out angle
- ar4020p0331fb Checking rear axle camber
- ar4020p0332fb Check and adjust toe on rear axle