ar4015s0100c

Remove/install tire pressure monitoring system control unit

Type ar · topic 40.15 · version 0100 · 2014-08-20

Applies to: MODEL 415 with CODE RY2 (Tyre pressure monitoring at FA and RA, wireless)

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.15 Tire pressure/tire pressure monitoring — Series 415

EinPAS 26 Active safety system › 26.29 Tire pressure loss detection system/tire pressure control › 26.29.11 Control unit/relay — Series 415

AR40.15-S-0100C

Remove/install tire pressure monitoring system control unit

11.08.2014

MODEL

415

with CODE RY2 (Tyre pressure monitoring at FA and RA, wireless)

Remove/install tire pressure monitoring system control unit

1

Electrical connector

N88/1

Tire pressure monitor (RDK) control unit

S40.15-4521-06

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove stowage box/tray above windshield

AR68.30-S-5578C

2

Disconnect electrical connector (1)

3

Remove tire pressure monitor (TPM) control unit (N88/1)

To do so, pull headliner downwards slightly, release tire pressure monitor (TPM) control unit (N88/1) and remove.

4

Install in the reverse order

Check

5

Check tire pressure monitor for proper operation

To do so, start measurement of tire pressure in instrument cluster and undertake test drive to teach in tire pressure monitor for approx. 10 km, then read off the display on the instrument cluster.

Referenced documents