AR40.15-P-0100RT | Remove/install tire pressure monitoring system control unit | 27.8.09 |
MODEL 251
up to Model Year 2009
with CODE (475) Tire pressure monitor (Siemens)
P40.15-2241-07
1 Side trim in luggage compartment
2 Electrical connector
3 Catch tabs
N88 TPM [RDK] control unit
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Read out variant coding of TPM [RDK] control unit (N88) | To do this, connect STAR DIAGNOSIS and read data from TPM [RDK] control unit (N88) into STAR DIAGNOSIS. | |
| |||
Installation: Transfer stored data into the new TPM [RDK] control unit (N88). | |||
2 | Bend the side trim in the luggage compartment (1) to one side | ||
3 | Disconnect electrical connector (2) on the TPM [RDK] control unit (N88) | ||
4 | Unclip TPM [RDK] control unit (N88) and remove upwards (arrow) from the brackets | To unclip, pull the catch lugs (3) on the bracket forwards and unlock. | |
5 | Install in the reverse order | ||
6 | Read out fault memory and erase | Stored faults which may be caused by assembly work, test work, removed lines or a simulation, must be processed and erased in fault memories after completing the work. | |
7 | Activate the tire pressure monitoring system | See: | |
Perform adjustments to the control system |
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar5430p100002rta Perform adjustments to the control system