ar4000p0250g

Remove/install spare tire carrier

Type ar · topic 40.00 · version 0108 · 2019-05-03

Applies to: Model 463.200/204/206/207/208/209/250/254/300/303/304/306/307/308/309 up to model year 2013 Model 463.202 up to model year 2013 /Facelift 2012

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.00 General — Series 463 (models 200, 202, 204, 206, 207, 208, 209, 250, 254, 300, 303, 304, 306, 307, 308, 309)

EinPAS 20 Chassis › 20.30 Wheel/tire › 20.30.30 Wheel/tire/spare wheel — Series 463 (models 200, 202, 204, 206, 207, 208, 209, 250, 254, 300, 303, 304, 306, 307, 308, 309)

AR40.00-P-0250G

Remove/install spare tire carrier

02.05.2019

Model

463.200/204/206/207/208/209/250/254/300/303/304/306/307/308/309

up to model year 2013

Model

463.202

up to model year 2013

/Facelift 2012

Remove/install spare tire carrier

A

Rear wall paneling

B

Stop lamp cable

X20/1

3rd brake lamp connector

P64.10-2071-02

Remove/install spare tire carrier

1

Spare wheel

2

Spare wheel carrier

3

Bolts

4

Gas-filled strut

5

Bolts

P40.00-0259-06

Remove/install

1

Remove spare tire (1)

See operator's manual.

2

Remove soft top frame


Model 463.200/204/207/300/304/307, 463.208/308 ## up to 108894
up to model year 2000Manual soft top

AR77.33-P-1002G

3

Remove soft top mounting rail at right beltline


Model 463.200/204/207/300/304/307, 463.208/308 ## up to 108894
up to model year 2000Manual soft top

AR77.30-P-1000G

Model 463.202
as of model year 2000 up to model year 2013
Hydraulic soft topModel 463.206/208/209/308 ## as of 108895, 463.250/254/303/306/309
as of model year 2000 up to model year 2013Hydraulic soft top

AR77.30-P-1000GA

4

Remove right side wall trim


Model 463.200/204/206/207/208/209/300/304/307/308 ## up to 108894
up to model year 2000Manual soft top

AR68.30-P-1450G

Model 463.202
as of model year 2008 up to model year 2013
Model 463.206/208/209/308 ## as of 108895
up to model year 2000
Hydraulic soft topModel 463.250/254/303/306/309
as of model year 2000 up to model year 2013

AR68.30-P-1450GA

5

Remove rear wall paneling (A)

Model 463.202
up to model year 2013
Model 463.250/254/303/306/309
up to model year 2013

6

Disconnect 3rd brake lamp connector coupling (X20/1)

On models with 3rd brake lamp.

Installation: Perform function check on 3rd brake lamp.

7

Feed brake lamp cable (B) through rear panel

On models with 3rd brake lamp.

8

Remove spare tire mount (2) on rear wall

Remove inner bolts (3).

9

Remove retainer on pneumatic spring (4)

10

Remove pneumatic spring (4)

When replacing the pneumatic spring, the pneumatic spring (old part) must be disposed of.

11

Remove rear bumper


Model 463.200/204/206/207/208/209/300/304/307/308
up to model year 2000

AR88.20-P-2200GG

Model 463.202/250/254/303/306/309
as of model year 2002 up to model year 2013

AR88.20-P-2200GR

12

Remove spare tire mount (2) at bottom

Remove screws (5).

13

Remove spare tire mount (2)

14

Install in the reverse order

Referenced documents