ar3530p0665rt

Replace rubber boots on rear axle shaft

Type ar · topic 35.30 · version 0100 · 2005-07-06

Applies to: MODELS 251

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 251

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Series 251

AR35.30-P-0665RT

Replace rubber boots on rear axle shaft

11.5.05

MODELS 251

Replace rubber boots on rear axle shaft

P35.30-2107-06

1 Circlip

2 Inner joint

3 Rear axle shaft

4 Circlip

5 Large hose clamp

6 Rubber boot (inner)

7 Small hose clamp

8 Outer joint

9 Large hose clamp

10 Outer rubber boot

11 Small hose clamp

Remove

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with lifting platform

AR00.60-P-1000RT

2

Remove rear axle shaft (3)

AR35.30-P-0620RT

Disassemble/assemble

3

Detach large hose clamp (5, 9) and small hose clamp (7, 11) using a suitable tool

4

Detach inner rubber boot (6) from inner joint (2) and outer rubber boot (10) from outer joint (8)

Observe filling capacities of inner rubber boot (6) and outer rubber boot (10).

AR35.30-P-0665-02RT

Rubber boot of left inner joint

*BF35.30-P-1001-01F

Rubber boot of left outer joint

*BF35.30-P-1002-01F

Rubber boot of right inner joint

*BF35.30-P-1003-01F

Rubber boot of right outer joint

*BF35.30-P-1004-01F

5

Knock out the outer joint (8)

AR35.30-P-0665-01RT

6

Remove inner rubber boot (6) and outer rubber boot (10) from rear axle shaft (3)

Removal: The inner rubber boot (6) can only be removed when the outer joint (8) has been knocked out

Installation: To push on the boots, place a suitable assembly sleeve on the splined section of the rear axle shaft (3).

7

Replace circlip (1, 4).

8

Assemble in the reverse order

Install

9

Install rear axle shaft (3)

AR35.30-P-0620RT

Rear axle shaft

Number

Designation

Type 251

BF35.30-P-1001-01F

Rubber boot of left inner joint

Filling capacity

g

125

BF35.30-P-1002-01F

Rubber boot of left outer joint

Filling capacity

g

110

BF35.30-P-1003-01F

Rubber boot of right inner joint

Filling capacity

g

125

BF35.30-P-1004-01F

Rubber boot of right outer joint

Filling capacity

g

110

Referenced documents