ar3530p062002p

Extract/press in rear axle shaft from rear axle differential

Type ar · topic 35.30 · version 0109 · 2009-02-17

Applies to: MODEL 203, 209 Hinterachswelle gesteckt

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 203 · Series 209

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Series 203 · Series 209

AR35.30-P-0620-02P

Extract/press in rear axle shaft from rear axle differential

Extract/press in rear axle shaft from rear axle differential

P35.30-2020-01

Pull out rear axle shaft

1 Using a suitable tool (e.g. screwdriver, assembly lever), press rear axle shaft (37) out of the rear axle center assembly.
When pressing out the rear axle shaft (37), do not damage the radial sealing ring in order to prevent leakage. Rear axle shafts (37) with damaged joints or boots must be replaced in order to guarantee full functioning.

Extract/press in rear axle shaft from rear axle differential

P35.30-2021-01

Press in rear axle shaft

2 Press in rear axle shaft (37) until circlip (37g) is felt to engage.
Align the joint ring (37c) horizontally before inserting it. The splined profile may otherwise tilt when being inserted and therefore be damaged.
When pressing the rear axle shaft (37) into the rear axle center assembly, do not damage the radial sealing ring in order to prevent leakage. The joint ring (37c) must be flush with the rear axle housing.