ar3530b430004b
Remove/install ring gear on differential housing
Type ar · topic 35.30 · version 0200 · 2020-08-14
Applies to: Rear axle 746.231/305 in model 934.24, 938.14, 958.4
Where it sits
Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 934 (models 24*) · Series 938 (models 14*) · Series 958 (models 4**)
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 934 (models 24*) · Series 938 (models 14*) · Series 958 (models 4**)
Also applies to engines/gearboxes: 746 231, 746 305
AR35.30-B-4300-04B
| Remove/install ring gear on differential housing
|
|
|
Rear axle
| 746.231/305 in model 934.24, 938.14, 958.4
|
Central actuation with differential
|
Number
| Designation
|
|
|
| Rear axle 746.231/305
|
BA35.30-B-1014-03J
| Ring gear in the differential box
| M18x1.5
| 1st stage
| Nm
| 200
|
|
|
|
| 2nd stage
| °
| 90
|
Number
| Designation
| Order number
|
BR00.45-Z-1112-06A
| Lubricating oil for transfer case and drive axle, DB supply specification 6630.00 - SAE 85W90 and 90
| Use corresponding commercially available repair materials.
|
1
| Remove the screws (1) leaving four screws partially tightened on the opposite sides of the differential case (3).
|
|
| Loose only four screw turns not to damage the differential case threads (3).
|
2
| Support the toothed crown (2) with the teeth side (arrows) on a proper base.
|
|
| The differential case (3) should not be supported.
|
3
| Remove the toothed crown (2) from the differential case (3) with plastic mallet blows over the screw heads (1).
|
|
| Hit on the screw head (1)alternately until is detached from the differential housing (3) the toothed crown (2).
|
4
| Mount the guide screws (4) on the differential case (3) and mount the toothed crown (2).
|
|
| Before to assembly, lubricate all moving parts with gear oil.
|
5
| Mount the screws (1) and tighten with the prescribed torque.
|
|
| For better control of the tightening, mark the screws (1) as they are tightened.
|
