Remove/install rear axle shaft flange and angular ball bearing

AR35.20-P-0130RT

Remove/install rear axle shaft flange and angular ball bearing

12.8.13

MODEL

164, 251

1

Wheel carrier

9

Rear axle shaft flange

9n

Wheel bearings

11

Retaining ring

 

Remove/install

1

Remove wheel carrier (1)

MODEL 251.0/1

AR35.20-P-0115RT

MODEL 164

AR35.20-P-0115GZ

2

Pull out rear axle shaft flange (9)

AR35.20-P-0130-08RT

 Installation: The rear axle shaft flange (9) and wheel bearing (9n) must generally be replaced with new ones.

 Extraction tool

*202589044300

 Extraction and insertion tool

*220589064300

3

Remove retaining ring (11)

 Installation: Make sure that the retaining ring (11) is seated correctly in the wheel carrier (1).

4

Pull wheel bearing (9n) out of wheel carrier (1)

AR35.20-P-0130-03RT

 Installation: Pay attention to installation position. The points or the line on the wheel bearing (9n) must point towards the hub/rotor assembly (1).

 Extractor and insertion tool

*140589084300

 Drift

*164589041500

5

Install in the reverse order