AR35.10-D-0010D | Remove/install complete rear axle | 22.1.09 |
REAR AXLE 742.5 in MODEL 668, 670
with CODE (A71) Rear axle differential lock
with CODE (B02) Brake system, antilock brake system (ABS)
D35.10-0052-09
1 Nut
2 ALB lever
3 Plug (for axles with code A71)
4 Connector for brake pad wear indicator
5 Connectors (for axles with code B02)
12 Washer
13 Nut
14 Screw
15 Shock absorber
16 Screw
17 Nut
18 Propeller shaft
6 Brake lines (hydraulic)
7 Compressed-air line
8 Hydraulic line (for axles with
code A71)
9 Vent line (axle housing)
10 Spring U-bolt
11 Spring plate
| Remove/install | ||
1 | Remove wheels | Support vehicle at frame | |
2 | Detach connector for brake pad wear indicator (4) | ||
3 | Separate connector (5) | for axles with ABS, code B02 | |
4 | Detach ALB lever (2) on linkage | Installation: Use new nut (1) | |
5 | Disconnect plug (3) | for axles with differential lock, | |
5.1 | Detach hydraulic line (8) | Seal off line end and threaded stud with plugs in order to prevent contamination. | |
6 | Detach compressed-air line (7) | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
7 | Undo brake lines (6) from brake hoses, detach holddown clips and remove brake hoses from bracket | Seal off line ends and threaded stud with plugs in order to prevent contamination. | |
8 | Pull vent line (9) out of frame | ||
9 | Take off both shock absorbers (15) at rear axle | | |
10 | Secure propeller shaft (18) to prevent it from falling down and detach at drive flange | Installation: Use new nuts (17) | |
| |||
11 | Remove spring brackets (10) and spring plates (11) | | |
12 | Secure rear axle against falling and lower slowly. | ||
13 | Install in the reverse order | ||
14 | Bleed brake system | ||
15 | Bleed differential lock hydraulic system | for axles with differential lock, |
Rear axle steel suspension
Number | Designation | Model 668, 670 | Model 667 | ||
BA32.20-N-1001-03B | Rear axle spring bracket | M121.5 | Nm | 114 | 114 |
M141.5 | Nm | 155 | 155 | ||
M161.5 | Nm | 240 | 240 | ||
Rear axle shock absorber
Number | Designation | Models | ||
BA32.25-N-1001-03C | Bolt/nut, shock absorber to axle console | M141.5 | Nm | 100 |
Propeller shaft
Number | Designation | Model | Model | ||
BA41.10-N-1002-01D | Bolt, rear propeller shaft to rear axle | M101 | Nm | 70 | - |
M121 | Nm | - | 76 | ||
000 589 21 01 00
001 589 44 21 00
Torque wrench handle
Open end wrench
Referenced documents
- ar4010d1100a Remove/install wheels
- as4250z000101a Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid