Remove, seal and install front axle shaft flange · ar3320d0317a · Mercedes-Benz WIS

AR33.20-D-0317A

Remove, seal and install front axle shaft flange

15.1.97

MODELS 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG1) Engageable all-wheel drive

MODELS 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG2) Permanent all-wheel drive

MODELS 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG3) Gear reduction for all-wheel drive

D33.20-0056-06

1 Front axle shaft flange

2 Radial shaft seal

3 Nut

4 Rubber stopper

 	Remove/Install
1	Remove front wheel		AR40.10-D-1100A
2	Remove steering knuckle		AR33.25-D-0400D
3	Remove front axle drive shaft		AR33.30-D-0100A
4	Remove rubber stopper (4)	  Installation: Replace nut (3).	*BA32.20-N-1003-01A
5	Pull out front axle shaft flange (1)	 Drive out with plastic mallet or lever out with assembly tool.
6	Remove radial shaft seal (2)	 Installation: Before installation (2), coat new radial shaft sealing ring on the outer sealing surface with sealing compound.
			*901589001500
		Varybond model 1350, high-strength (green)	*BR00.45-Z-1077-02A
7	Install in the reverse order
8	Check and correct front axle gear oil level
	Front axle - oil change		AP33.00-D-3301A

 Front axle steel suspension

Number	Designation			Model 903.0/4/6 and model 904.0/4/6 with code ZG1, ZG2, ZG3


BA32.20-N-1003-01A	Stop buffer to front axle housing	M10	Nm	45
		M8	Nm	-

Drift

901 589 00 15 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1077-02A	Varybond model 1350, high-strength (green)	Wingerath Vertrieb & Service Wilhelm-Hecking-Str. 2 58099 Hagen Germany Tel. +49 2331 396271 Fax + 49 2331 396272 www.wvs-wingerath.de