Remove/install front axle carrier · ar3310p0001rt · Mercedes-Benz WIS

AR33.10-P-0001RT

Remove/install front axle carrier

7.11.11

MODEL 251

P33.25-2050-06

1 Front axle carrier

2 Stabilizer bar

2s Bolts

3 Bolts

4 Bolts

5 Nuts

6 Bolts

7 Rack-and-pinion steering

8 Heat shields

Modification notes

19.10.11

Value hanged: Screw/bolt, retaining clamp for stabilizer bar to front axle carrier

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	When working on the front-end assembly, be careful not to scratch, mark or notch the surfaces of aluminum parts. Otherwise the service life of the parts will be affected
1	Remove front axle		AR33.10-P-0100RT
2	Remove bolts (2s) and remove torsion bar (2) from front axle carrier (1)		*BA32.20-P-1001-02L
3	Detach rack-and-pinion steering (7) from front axle carrier (1) and detach tie rods from steering knuckles		AR46.20-P-0600RT
4	Remove bolts (3, 4)		*BA33.20-P-1005-01L
			*BA33.20-P-1006-01L
5	Unscrew nuts (5), pull out bolts (6) and remove front-axle halves	 Installation: Final tightening if vehicle on measuring platform or in K0 position, in order to avoid placing the rubber mount under stress.
			*BA33.20-P-1004-01L
6	Detach heat shields (8) from front axle carrier (1)
7	Install in the reverse order

 Front axle stabilizer bar

Number	Designation		Model 251


BA32.20-P-1001-02L	Bolt, stabilizer bar retaining clamp to bearing bracket	Nm	180

 Wheel control, hub

Number	Designation		Model 251


BA33.20-P-1004-01L	Self-locking nut, lower front transverse control arm to front axle carrier	Nm	270
BA33.20-P-1005-01L	Bolt, lower transverse control arm at inside rear to front axle carrier	Nm	250
BA33.20-P-1006-01L	Bolt, lower transverse control arm at outside rear to front axle carrier	Nm	181