Shown on model 909.8 on left side of vehicle |
1 | Cover |
2 | Nut |
3 | Elastomer bearing |
4 | Shock-absorber strut |
5 | Bolt |
D32.25-1101-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Notes on repair work on suspension components | |||
| Remove | ||
1.1 | Place floor covering in driver-side footwell to one side | When removing the shock-absorber strut (4) on the left side. | |
1.2 | Remove cover for tools in passenger-side footwell | When removing the shock-absorber strut (4) on the right side. | |
2 | Remove cover (1) for corresponding upper shock-absorber strut attachment | If installed. | |
3 | Secure vehicle on vehicle lift | ||
4 | Remove respective front wheel and tire assembly | ||
5 | Remove electric line of rpm sensor from shock-absorber strut (4) | ||
6 | Lift up transverse control arm using major-assembly mounting by roughly 10 mm | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
7 | Unscrew nut (2) of corresponding upper shock-absorber strut attachment | ||
8 | Remove bolts (5) and remove shock-absorber strut (4) from steering knuckle | ||
| Install | ||
9 | Check elastomer bearing (3) for damage, replace, if necessary | ||
10 | Position upper shock-absorber strut mounting in footwell and tighten nut (2) lightly by hand | Replace nut (2). | |
11 | Lift up transverse control arm using major-assembly mounting | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
12 | Position shock-absorber strut (4) onto steering knuckle and tighten bolts (5) | Bolt, shock-absorber strut to steering knuckle | |
13 | Mount electric line of rpm sensor onto shock-absorber strut (4) | ||
14 | Lower major assembly support and slide to one side | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
15 | Attach corresponding front complete wheel | ||
16 | Release vehicle on lifting platform | ||
17 | Lower vehicle with lifting platform | ||
18 | Tighten nut (2) of upper shock-absorber strut attachment | Nut, damper strut to body | |
19 | Install cover (1) for upper shock-absorber strut attachment | If the cover (1) was removed. | |
20.1 | Insert cover for tools in passenger-side footwell | When installing the shock-absorber strut (4) on the right side. | |
20.2 | Refit floor covering in driver-side footwell | When installing the shock-absorber strut (4) on the left side. | |
21 | Perform wheel alignment check |
Referenced documents
- ah0000p010001a Notes on repair work on suspension components
- ar0060d0100f Secure vehicle on vehicle lift
- ar4010d1100f Remove/install wheels
- ar4020d0200fa Perform wheel alignment check
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- ws0100p0092b 000 588 11 62 00 Major assembly mount
- ws2600p3309b 000 588 10 62 00 Support plate