Remove/install compressor · ar3222p2001rt · Mercedes-Benz WIS

AR32.22-P-2001RT

Remove/install compressor

3.5.12

MODEL 251
with CODE (488) Steel/air suspension
with CODE (489) AIRmatic (air suspension with level adjustment and adaptive damping system ADS )

P32.22-2355-06

Shown on vehicle with code 489 AIRmatic (air suspension with level adjustment and adaptive damping system ADS)

1 Electrical connectors

2 Pressure line

3 Clamp

A9/1 AIRmatic compressor unit

Shown on vehicle with code 489 AIRmatic (air suspension with level adjustment and adaptive damping system ADS)

4 Nuts

A9/1 AIRmatic compressor unit

P32.22-2356-03

Modification notes

12.11.08

Value changed: Nut, compressor to bracket

*BA32.22-P-1001-03C

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on AIRmatic		AH32.22-P-1000-02RT
1	Jack up vehicle until the wheels are clear of the ground		AR00.60-P-1000RT
2	Remove fender liner front section in front fender	 Front section of fender liner in right front fender.	AR88.10-P-1310RT
3	Separate electrical connectors (1)
4	Detach pressure line (2) from the AIRmatic compressor unit (A9/1)	 Seal off the pressure line (2) using a blind plug for the duration of the repair work. If pressure line connections or pressure lines (2) are damaged: 
		Repair pressure line connection, see Repair AIRmatic pressure line connection.	AR32.22-P-2001-02RT
			*BA32.22-P-1002-03C
		 Socket wrench bit	*211589000900
		 Knife	*000589122800
		Leak detection spray	*BR00.45-Z-1002-03A
		for USA	*BR00.45-Z-1004-03A
5	Loosen clamp (3) and seal intake hose
6	Unscrew nuts (4) and remove AIRmatic compressor unit (A9/1)		*BA32.22-P-1001-03C
7	Detach AIRmatic relay (K67)	 Only when installing a new AIRmatic compressor unit (A9/1). When replacing, the AIRmatic relay should always also be replaced (K67) as the switching contacts may be predamaged.
	Relay assignment of fuse and relay box in right engine compartment		GF54.15-P-1257-02RT
8	Install in the reverse order
9	Check air suspension for leaks	See Check AIRmatic for leaktightness.	AR32.22-P-8100RT

 Air suspension

Number	Designation		Model 251 with all-round level control system (code 489)	Model 251 without all-round level control system (code 489)


BA32.22-P-1001-03C	Nut, compressor to bracket	Nm	3	3
BA32.22-P-1002-03C	Pressure line, air suspension to compressor	Nm	3.5	3.5

211 589 00 09 00

Wrench socket

Slitting knife

000 589 12 28 00

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-03A

Leak detection spray

Christof Fischer GmbH,
Augsburger Str. 289-293,
70327 Stuttgart
Germany
Tel. +49 711 30502-0
Fax +49 711 30502-10
www.kaeltefischer.de

BR00.45-Z-1004-03A

Leakage spray for USA

LIQUI MOLY
Gary Boyd
1820 Clark Avenue

Long Beach, CA 90815
USA
Tel. +1 562 5975519

Fax + 1 562 5975269
www.liqui-moly.com

Referenced documents

ah3222p100002rt Notes on AIRmatic
ar0060p1000rt Lift/jack up vehicle
ar3222p200102rt Repairing AIRmatic pressure line connection
ar3222p8100rt Check AIRmatic for leaks
ar8810p1310rt Remove/install fender liner front section in front fender
as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
gf5415p125702rt Relay assignment of fuse and relay box in right engine compartment