AR32.22-D-2005B | Remove/install rear axle level-control valve | 16.12.97 |
MODEL 670.### ## as of 060080 up to 071157 with CODE (CE3) Air suspension at front and rear
Paul air suspension without electronic level adjustment (ENR)
D32.22-0023-09
1 Pressure line to air spring bellows
2 Pressure line to reservoir
3 Pressure line to reservoir
4 Bolt
9 nut
38.02 Test connection
41.01 Level-control valve
5 Actuation lever
6 Banjo bolt
7 Sealing ring
8 Bolt
| Remove/Install | ||
1 | Depressurize air suspension | For this purpose, loosen pressure lines (1, 2 and 3) on level-control valve (41.01) until the pressure is eliminated. | |
2 | Unscrew pressure lines (1, 2 and 3) on level-control valve (41.01) | Installation: Install new sealing rings (7). Do not mix up pressure lines (1, 2 and 3 ). | |
3 | Unscrew operating lever (5) on level-control valve (41.01) | Installation: Insert operating lever (5) in the guide so that it points in the direction of the arrow. | |
4 | Unscrew and remove level-control valve (41.01) | ||
5 | Install in the reverse order | ||
6 | Check air suspension for leaks | ||
7 | Check vehicle level and adjust if necessary |
Referenced documents
- ar3222d7000b Check and adjust vehicle level
- ar3222d8000b Check air suspension for leaks