AR27.55-T-0600A | Removing, installing oil pipes of automatic transmission oil cooling | 21.12.98 |
TRANSMISSION 721.913 /914 /915 /916 /917
T18.30-0001-11
1 Top oil pipe
2 Bolts
3 Bottom oil pipe
4 Bolts
5 Oil drain plug
T18.30-0002-11
6 Bracket of oil pipe
7 Bolts
| Removing, installing | ||
1 | Open outer flap of transmission | At rear left side of vehicle. | |
2 | Take off engine compartment encapsulation below transmission | ||
3 | Open transmission service flap in interior | Remove row of seats above transmission service flap, if necessary. | |
4 | Drain oil | Unscrew drain plug at oil cooler and collect oil in a suitable vessel. | |
Installation: Screw in drain plug. Pour in remaining quantity of oil (according to quantity drained), pay attention to capacity, see also: | |||
See Maintenance Manual: Oil change automatic transmission | |||
5 | Detach top oil pipe (1) from oil cooler | Unscrew both bolts (2) at flange of oil pipe. | |
| |||
6 | Detach bottom oil pipe (3) from oil cooler | Unscrew both bolts (4) at flange of oil pipe. | |
| |||
7 | Detach bracket of oil pipes (6) | ||
8 | Unscrew bolts at bracket of oil pipes at transmission (7) and take off bracket | Detach oil pipes from flange. | |
| |||
9 | Take off oil pipes | ||
10 | Install in the reverse order |
Transmission oil cooling