P27.50-0247-09
3 Oil pan
3a Gasket
4 Hexagon bolt
5 Oil filter
7 Hexagon bolt
8 Hexagon bolt
140 Hexagon bolt
142 Locking spring
151 Adjusting ring and locking washer
152 Locking lever
Y3/2 Shift point retard solenoid valve
13 Bottom cover
14 Large intermediate plate
15 Oil guide pipe
98 Control pressure cable
108 Banjo bolt
135 Fixing pin
| Dismantling, assembling | ||
1 | Remove transmission with torque converter | ||
2 | Remove control pressure cable (98) with vacuum actuator | ||
3 | Remove switchover valve (Y3/2) for shift point retard | Vehicles with catalytic converter and shift point retard by means of solenoid valve. | |
4 | Fasten transmission on assembly bracket | | |
5 | Remove shift valve housing (9) | ||
6 | Remove bottom cover (13) with intermediate plate (14) | ||
7 | Remove one-way valves, B2 brake band guide, oil deflector and temperature throttle from transmission housing | ||
| One-way valve dispensed with | Transmission 722.5 | |
9 | Assemble in reverse sequence | Follow up work | |
Dismantling transmission (section 2) |
Crown wheel/pinion
Number | Designation | Transmission 722.3/4/50 | |
BA27.50-P-1001-01A | Collared nut, output flange to output shaft | Nm | 120 |
129 589 07 63 00
116 589 06 59 00
126 589 10 63 00
Support
Mounting plate
Assembly bracket
Referenced documents
- ar2710p0200a Removal and installation of control pressure cable with vacuum actuator
- ar2710p0500a Remove/install transmission with torque converter
- ar2710p060001a Fastening transmission to assembly bracket
- ar2735p0320a Remove/install valve body assembly
- ar2735p0360a Removal and installation of bottom cover with intermediate plate
- ar2750p060003a Removal and installation of one-way valve, B2 brake band guide, oil deflector and temperature throttle
- ar2750p0620a Dismantling and assembling transmission (section 2)
- bt2750p000701a One-way valve discontinued