D27.00-1112-09
1 | Transmission housing | 44 | Output unit | |
1w | Torque converter housing | 55 | Housing components | |
16 | B1 multidisk brake | Y3/8 | Electric control unit | |
33 | Drive unit |
| Remove/install | ||
Notes on automatic transmission | |||
1 | Remove electric controller unit (Y3/8) | ||
2 | Detach transmission housing (1) from torque converter housing (1w) | ||
3 | Remove housing components (55) | ||
The housing components (55) are the clutch pack BR, multidisk brake B2 and park pawl gear. | |||
4 | Remove output unit (44) | ||
The output unit (44) consists of the multidisk clutch K3, rear hollow shaft, rear planet carrier, output shaft and rear ring gear. | |||
5 | Remove drive unit (33) | ||
The drive unit (33) consists of the drive shaft, multidisk clutch K2, front planet carrier, internal plate carrier, multidisk clutch K1 and multidisk brakeB3. | |||
6 | Remove multidisk brake B1 (16) | ||
7 | Remove oil pump | ||
8 | Install in the reverse order |
Referenced documents
- ah2719p000101nkb
- ah2719p000101nkb Notes on automatic transmission
- ar2710d0400we Remove/install oil pump
- ar2719d0200we Remove/install electrohydraulic controller unit (transmission installed)
- ar2750d0601we Detach/attach transmission housing on torque converter housing.
- ar2750d0611we Remove/install K3, rear hollow shaft, rear planet carrier and output shaft
- ar2750d0612we Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3
- ar2750d0721we Remove/install multi-disk brake B1 and oil pump
- ar2750d0782we Remove/install clutch pack BR, multidisk brake B2 and park pawl gear