AR26.60-W-6600A | Remove/install shift lever | 10.7.07 |
TRANSMISSION 712.63, 715.060 in MODEL 950, 952, 954 with CODE (GS3) "Hydraulic" gearshift
TRANSMISSION 715.3 /5 in MODEL 950, 952, 953, 954 with CODE (GS3) "Hydraulic" gearshift
TRANSMISSION 715.5 in MODEL 375.4, 930, 932, 933, 934, 940, 942, 943, 944 with CODE (GS3) "Hydraulic" gearshift
TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE (GS3) "Hydraulic" gearshift
Gearshift lever with flat sensor unit
1 Cap
2 Nut
3 Shift lever knob
4 Splitter group switch (on transmission 715.510/520)
5 Connecting piece (on transmission 715.561/570)
6 Boot
7 Gearshift lever
8 Shift control unit
9 Screw
W26.60-1239-03
Gearshift lever with high sensor unit
1 Cap
2 Nut
3 Shift lever knob
4 Splitter group switch (for transmission 715.320/500/507/510/513/520/540)
5 Connection piece (for transmission 712.63, 715.060/561/570)
6 Boot
7 Gearshift lever
8 Shift control unit
9 Screw
W26.60-1240-03
| Remove/install | ||
1 | Detach cap (1) and shift lever knob (3) from shift lever (7) | | |
2 | Pull boot (6) off center tunnel cutout | ||
3 | Expose electrical lines on gearshift lever (7) | Only for transmission 715.320/500/507/510/513/520/540 | |
4.1 | Detach splitter group switch (4) with boot (6) from shift lever (7) and place to one side | Transmission 715.320/500/507/510/513/ | |
4.2 | Detach connector (5) with boot (6) from shift lever (7) | Transmission 712.63, 715.060/561/570 | |
5 | Remove gearshift lever (7) from sensor unit (8) | High sensor unit | |
Flat sensor unit | |||
6 | Install in the reverse order |
Shift mechanism
Number | Designation | Transmission 715.500/507/510/513/520/540 | Transmission 715.500/507/510/513/520/540/561 with code GS3 and code IY2 | Transmission | ||
BA26.60-N-1030-01D | Clamp bolt for gearshift lever | Nm | 20 | 20 | 20 | |
BA26.60-N-1039-01D | Nut, shift lever knob to shift lever | Nm | 20 | 20 | 20 | |
BA26.60-N-1054-01D | Bolt, gearshift lever to sensor unit | Nm | - | 30 | 30 | |
Shift mechanism