AR26.18-T-2000B | Remove/install gear shift cylinder | 5.4.00 |
TRANSMISSION 714.120 /140 /691 /692 in MODEL NMB613 with CODE (G61) Electronic power shift (EPS)
TRANSMISSION 714.120 /140 /692 in MODEL NMB671 with CODE (G61) Electronic power shift (EPS)
T26.60-0020-01
Shown on transmission 714.691 with electronic power shift (EPS), code G61
1 Gear shift cylinder
2 Shift housing
Y51 EPS gearshift solenoid valve
Y52 EPS gearshift solenoid valve
Y53 EPS gearshift solenoid valve
Y54 EPS gearshift solenoid valve
| Remove/install | ||
1 | Check pneumatic lines and electric cables for damage, replace if necessary | ||
2 | Disconnect electrical connections on EPS gearshift solenoid valves (Y51, Y52, Y53, Y54) | Mark the electrical connections to the EPS gearshift solenoid valves (Y51, Y52, Y53, Y54). | |
Installation: Ensure correct assignment of the electrical connections to the EPS gearshift solenoid valves (Y51, Y52, Y53, Y54). | |||
3 | Disconnect pneumatic connections from gear shift cylinder (1) | ||
4 | Detach gear shift cylinder (1) from shift housing (2) | Installation: Replace sealing ring of shift rod of gear shift cylinder (1) and oil lightly. | |
| |||
| |||
5 | Install in the reverse order |
Transmission pneumatic system
Number | Designation | Trans-mission | Trans-mission | Trans-mission | Trans-mission | |
BA26.18-N-1001-01B | Bolt, gear shift cylinder to housing | Nm | 69 | 69 | 69 | 69 |
Torque wrench
000 589 64 21 00