P20.10-2330-08
1 | Coolant thermostat | 4 | Coolant connection | 9 | Coolant connection | ||
1s | Screw/bolt | 5 | Coolant connection | R48 | Coolant thermostat heating element | ||
2 | Sealing ring | 6 | Coolant connection | ||||
3 | Crankcase | 7 | Coolant connection |
| Remove/install | ||
1 | Drain coolant | ||
2 | Remove charge air distributor | ||
3 | Detach coolant hose at coolant connection (7) | ||
4 | Detach coolant hose at coolant connection (5) | ||
5 | Detach coolant hose at coolant connection (6) | ||
6 | Detach coolant hose at coolant connection (9) | ||
7 | Disconnect electrical connection on coolant thermostat heating element (R48) | ||
8 | Unclip engine wiring harness at coolant thermostat (1) | ||
9 | Detach coolant thermostat (1) at crankcase (3) | Installation: Install new seal (2). | |
Bolt, coolant thermostat to crankcase/cylinder head | |||
10 | Detach coolant hose at coolant connection (4) | ||
11 | Install in the reverse order | ||
| Check | ||
12 | Check cooling system for leaktightness | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform an engine test run and check engine for leaktightness |
Referenced documents
- ar0941p1310mt Remove/install charge air manifold
- ar0941p1310mta Remove/install charge air manifold
- ar2000p1010nkb Inspect cooling system for leaks
- ar2000p1142nkb Drain/pour in coolant
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.