ar1820p3471td

Remove/install oil filter housing

Type ar · topic 18.20 · version 0102 · 2011-12-19

Applies to: ENGINES 628.961 in MODEL 211.028

Where it sits

Function group 1 Engine › 18 Engine lubrication, engine oil cooling › 18.20 Oil filter — Series 211 (models 028) · Series 628 (models 961)

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.31 Filter/cooling/thermostat/fan/container — Series 211 (models 028) · Series 628 (models 961)

AR18.20-P-3471TD

Remove/install oil filter housing

7.12.11

ENGINES 628.961 in MODEL 211.028

Remove/install oil filter housing

P18.20-2038-09

1 Bracket

2 Hoses

3 Oil filter housing

7 Bolts

8 Seal

4 Cover

5 Oil filter element

6 Retaining clamp

Remove/install

1

Remove charge air cooler

AR09.41-P-6817TD

2

Detach bracket (1)

*BA18.20-P-1002-01M

3

Detach hoses (2) on oil filter housing (3)

4

Unscrew cover (4) on oil filter housing (3)

Take out oil filter element (5) to allow engine oil to flow off into the oil pan

*BA18.20-P-1004-01M

5

Remove retaining clamp (6).

6

Remove bolts (7)

*BA18.20-P-1001-01M

7

Remove oil filter housing (3)

Installation: Install new seal (8).

8

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for leaks with engine running

10

Inspect cooling system for leaks

AR20.00-P-1010HA

11

Check engine oil level

Oil filter

Number

Designation

Engine
628.961

BA18.20-P-1001-01M

Screw/bolts for oil filter housing on timing case

Nm

20

BA18.20-P-1002-01M

Bracket to oil filter housing and cylinder head cover

Nm

9

BA18.20-P-1004-01M

Threaded cap on oil filter

Nm

25

Referenced documents