| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
1 | Turn off ignition | ||
2 | Remove the acoustic encapsulation | ||
3 | Check the electrical conductors in the battery (G1), in the alternator (G2) and in the starter (M1) for securing and status | ||
4 | Check the poly-V belt tension | ||
5 | Inspect the poly-V belt for wear | ||
| |||
6 | Connect the probe cable in the alternator (G2) | ||
Test cable | |||
7 | Check the alternator function (G2) | ||
Voltage control (with load) | |||
Voltage control (without load) | |||
Test cable | |||
8 | Check the multifunction regulator function | ||
Terminal 15 Voltage | |||
Voltage connection L | |||
Voltage connection S | |||
Test cable | |||
9 | Remove the probe cable of the alternator (G2) and connect the electrical connector in the alternator (G2) | ||
10 | Install the acoustic encapsulation |
950 589 11 63 00
Test cable
Referenced documents
- ap1322b1351evi Inspect poly-V-belt for wear and damage
- ar1540b000103evi Check function of multifunction regulator
- ar1540b001001evi Connect test cable on alternator
- ar1540b001002evi Check alternator function
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.