Shown on removed air filter housing |
1 | Bolts |
2 | Spark plug connector |
T1/1 | Cylinder 1 ignition coil |
T1/2 | Cylinder 2 ignition coil |
T1/3 | Cylinder 3 ignition coil |
T1/4 | Cylinder 4 ignition coil |
T1/5 | Cylinder 5 ignition coil |
T1/6 | Cylinder 6 ignition coil |
D15.12-1112-06
| Remove/install | ||
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on avoiding damage to ignition system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Disconnect battery ground line | Disconnect/connect battery ground line | |
2 | Disconnect the electrical connectors of the ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6) | ||
3 | Unscrew the screws (1) at the ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6) | Screw/bolt, ignition coil to cylinder head cover | |
4 | Remove ignition coils (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6) with spark plug connectors (2) | ||
| Check | ||
5 | Check spark plug connectors (2), ignition coil connectors and ignition lines for damage, deformation and crack formation | Replace the affected ignition coil (T1/1, T1/2, T1/3, T1/4, T1/5, T1/6) if necessary. | |
6 | Install in the reverse order |
Referenced documents
- ah1510p000201v Notes on avoiding damage to ignition system
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar5410d0003sd Disconnect/connect battery ground line
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)