ar1440b2014c

Remove/install AdBlue tank

Type ar · topic 14.40 · version 0201 · 2018-11-21

Applies to: Engine 924 in model 979.276/277/279

Where it sits

Function group 1 Engine › 14 Exhaust manifold, engine brake, emission control system › 14.40 Exhaust aftertreatment, AdBlue — Series 979 (models 276, 277, 279)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.53 Container/filling fixture — Series 979 (models 276, 277, 279)

Also applies to engines/gearboxes: 924 ***

AR14.40-B-2014C

Remove/install AdBlue tank

05.11.2018

Engine

924 in model 979.276/277/279

Remove/install AdBlue tank

1

Level sensor

2

Reservoir fastening strap

3

Reservoir

B14.40-0116-11

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Drain the AdBlue from reservoir (3)

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Do not reuse drained AdBlue, because it may be contaminated and thus cause damage to the system.

2

Remove the level sensor (1)

AR14.40-B-2013A

3

Remove the reservoir fastening strap (2)

4

Remove the reservoir (3)

5

Install on the reverse order

Referenced documents