Remove/install charge air pressure and temperature sensor downstream of throttle valve · ar0941s2012ce · Mercedes-Benz WIS

AR09.41-S-2012CE

Remove/install charge air pressure and temperature sensor downstream of throttle valve

29.01.2019

Engine

608 in model 415

Remove/install charge air pressure and temperature sensor downstream of throttle
valve

1	Cable duct
2	Screw
3	Electrical connector
4	Screw
5	Sensor

S09.41-A011-76

 Warning	Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.	Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.	AS49.00-Z-0001-01A
 Warning	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
 	Remove/install
1	Remove cable duct (1).	 Unscrew screw/bolt (2) to do this.
		 M6	*BA00.10-N-1002-01A
2	Disconnect electrical connector (3).
3	Unscrew bolt (4).	 Screw, pressure and temperature sensor to mixer housing	*BA09.41-N-1001-01CE
4	Remove sensor (5).	 Seal off opening.
		 Installation: Replace sensor (5).
		 Record plug	*129589009100
5	Install in the reverse order.
6	Read out fault memory with vehicle diagnosis system.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-S-2000-04C
		If existing faults are shown:
		
		Erase the fault memory.
7	Disconnect diagnostic unit.
	Check
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
8	Check for leaktightness when engine is running.	 Visual inspection only.

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number	Designation			8.8	10.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	9	13
		Phosphated	Nm	9	12

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number	Designation			12.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	16
		Phosphated	Nm	14

 Charge air system

Number	Designation		Engine 608 in model 415
BA09.41-N-1001-01CE	Screw, pressure and temperature sensor to mixer housing	Nm	10

129 589 00 91 00

Record plug

Referenced documents

ad0000s200004c Connect STAR DIAGNOSIS and read out fault memory
ah0000p500001a Notes on avoiding damage through contamination and foreign objects
ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
as4900z000101a Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust.