ar0941s2002sj

Remove/install charge air temperature sensor

Type ar · topic 09.41 · version 0101 · 2013-10-02

Applies to: ENGINE 651 in MODEL 636, 639

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 636 · Series 639 · Series 651

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 636 · Series 639 · Series 651

AR09.41-S-2002SJ

Remove/install charge air temperature sensor

10.9.13

ENGINE

651 in MODEL 636, 639

Remove/install charge air temperature sensor

1

Electrical connection

B17/13

Charge air temperature sensor

S09.41-4540-11

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Raise vehicle

AR00.60-S-1000S

2

Remove front lower engine compartment paneling

Model 636, 639.7##/8## ## as of 055347

AR61.20-S-1105-02S

3

Disconnect electrical connection (1)

4

Remove charge air temperature sensor (B17/13)

To do this unclip and remove charge air temperature sensor (B17/13).

Installation: Replace sealing ring.

5

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

Visual inspection only.

Referenced documents