Remove/install charge air pressure and temperature sensor upstream of throttle valve

AR09.41-P-2011MRT

Remove/install charge air pressure and temperature sensor upstream of throttle valve

25.04.2018

Engine

256.9 in model 222

1

Electrical connector

5

Bolts

2

Screw

B28/26

Pressure and temperature sensor upstream of throttle valve

4

Cable rail

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove air filter housing.

AR09.10-P-1150MRT

2

Remove screws (5) and place cable rail (4) to one side.

 M61

*BA00.10-P-1002-04A

3

Release electrical connector (1) and disconnect.

4

Remove screw (2).

 Screw, pressure transducer to charge air line

*BA09.41-P-1007-01MRT

5

Remove pressure and temperature sensor upstream of throttle valve (B28/26).

6

Install in the reverse order.

7

Read out and delete fault memory.



AD00.00-P-2000-04B

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Carry out engine test run and check engine for proper leaktightness and leaktightness.

 Metric screws/bolts and nuts as per MBN 10 105, 10 143

Number

Designation

8.8

10.9

BA00.10-P-1002-04A

M61

Nm

9

13

 Charge air pipe/charge air cooling

Number

Designation

Engine 256.9

BA09.41-P-1007-01MRT

Screw, pressure transducer to charge air line

Nm

8