ar0941d2002we

Remove/install charge air temperature sensor

Type ar · topic 09.41 · version 0101 · 2011-06-07

Applies to: ENGINES 651 in MODEL 900 ENGINES 651.955 /956 /957 in MODEL 906

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 651 · Series 900 · Series 906

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 651 · Series 900 · Series 906

AR09.41-D-2002WE

Remove/install charge air temperature sensor

23.5.11

ENGINES 651 in MODEL 900

ENGINES 651.955 /956 /957 in MODEL 906

Remove/install charge air temperature sensor

D09.41-1157-06

1 Electrical connector

2 Engine charge air duct

B17/13 Charge air temperature sensor

Remove/install

1

Lift/jack up vehicle

AR00.60-D-1000H

2

Disconnect electrical connector (1) from charge air temperature sensor (B17/13)

The electrical connector (1) also, at the time, secures the snap-in bracket on the charge air temperature sensor (B17/13).

3

Press snap-in bracket together (arrows) and release charge air temperature sensor (B17/13) from the mount

To not engage or disengage the charge air temperature sensor (B17/13) with the put on electrical connection (1). The snap-in bracket may be overstretched otherwise. Always replace charge air temperature sensor (B17/13) with defective snap-in brackets.

4

Remove charge air temperature sensor (B17/13) from the engine charge air duct (2)

Installation: Replace sealing ring.

5

Install in the reverse order

Referenced documents