ar0941b1311f

Remove/install charge air pipe

Type ar · topic 09.41 · version 0100 · 2016-02-12

Applies to: Cumbustion engine 376.922 with Vehicle 382.068

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 376 (models 922) · Series 382 (models 068)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 376 (models 922) · Series 382 (models 068)

AR09.41-B-1311F

Remove/install charge air pipe

12.02.16

Cumbustion engine 376.922 with Vehicle 382.068

Remove/install charge air pipe

B09.41-0020-12

1 Clamp

2 Nut

3 Screw

4 Clamp

5 Charge air tube on turbocharger

6 Sealing ring

7 Clamp

8 Screw

9 Support

10 Charge air tube

Remove and install

Danger!

Safety measures for maintenance work on natural gas powered engines.

AS00.00-B-0015-01A

Danger!

Safety measures while engine is running.

AS00.00-B-0005-01A

1

Turn off the main switch or disconnect the negative battery cable.

2

Remove fastening screws (8) from air tube (5).

*BA09.41-B-1004-01A

3

Loosen clamps (4) and remove hose.

Installation: Check clamps and hose for damage, replace as necessary.

*BA09.41-B-1001-01A

4

Loosen clamp (7) and remove charge air tube (5) together with sealing ring (6).

Installation: Mount a new neutral vaseline-lubricated sealing ring.

Close turbocharger connection to prevent dirt penetration.

5

Loosen clamp (1) and disconnect connecting hose (red) to after-cooler.

Installation: Check condition of hose and clamp, replace as necessary.

6

Remove screws (3), loosen nuts (2) and remove charge air tube (10).

7

Install in reverse order.

Installation: All tubings must be clean inside and out.

8

Start engine and verify leak tightness.

Charge air pipe/charge air cooling

Número

Denominação

Engine 376.922

BA09.41-B-1001-01A

Fastening of the clamps on the inlet and outlet flexible hoses

Nm

10

BA09.41-B-1004-01A

Air intake duct fastening

Nm

25

Referenced documents