Remove/install oil feed line for turbocharger

AR09.40-D-6022WE

Remove/install oil feed line for turbocharger

23.5.11

 

Remove/install

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

1

Remove engine trim panel

AR01.10-D-2405WE

2

Remove air intake pipe

AR09.10-D-8131WE

3

Unscrew union nut (3) for oil feed line (1)



*BA09.40-N-1007-01R

4

Unscrew banjo (4) and remove oil feed line (1)

 Use suitable plugs to seal the openings.

 Installation: Replace sealing rings of banjo bolts (4).



*BA09.40-N-1004-01R

5

Remove oil feed line (2) on bracket (5)

6

Remove alternator

AR15.40-D-5032WE

7

Remove bolt (6) and pull out oil feed line (2) from cylinder crankcase

 Installation: replace sealing ring of oil feed line (2).

8

Install in the reverse order

9

Check engine oil level, correct if necessary

 The engine oil level must not lie above the maximum marking. Engine damage may occur otherwise.



Low SPAsh multigrade service engine oils (specification 228.51)

Sheet 228.51

BB00.40-P-0228-51A



Multigrade service engine oil Low SPAsh

Sheet 229.31

BB00.40-P-0229-31A

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

10

Perform an engine test run, stop engine and check in area of oil feed lines (1, 2) for leaks

Number

Designation

Engine
651
in model
900

Engine
651
in model
906

BA09.40-N-1004-01R

Banjo bolt, lubricating oil line to turbocharger

Nm

18

18

BA09.40-N-1007-01R

Lubricating oil lines connection

Nm

22

22