ar0940d6022sd

Remove/install oil feed line for turbocharger

Type ar · topic 09.40 · version 0105 · 2010-07-06

Applies to: ENGINES 646.984 /985 /989 /990 in MODEL 906

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.40 Turbocharger — Series 646 (models 984, 985, 989, 990) · Series 906

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.13 Line/hose/valve — Series 646 (models 984, 985, 989, 990) · Series 906

AR09.40-D-6022SD

Remove/install oil feed line for turbocharger

16.6.10

ENGINES 646.984 /985 /989 /990 in MODEL 906

Remove/install oil feed line for turbocharger

D09.40-0032-08

Shown on engine 646.984

1 Bolt

2 Banjo bolt

4 Turbocharger

3 Oil feed line

 	Remove/install
1	Remove intake air hose downstream of air filter		AR09.10-D-8030-01SD
2	Remove bolt (1)		*BA09.40-N-1004-01O
3	Unscrew banjo bolt (2) at turbocharger (4)		*BA09.40-N-1003-01O
4	Remove oil feed line (3)	 Installation: Clean sealing surfaces, replace sealing rings.
5	Install in the reverse order
6	Check engine oil level, correct if necessary	 The engine oil level must not be above the maximum mark. This can lead to engine damage.
		 Engine oil, Specifications for Operating Fluids	*BF18.00-N-1001-01L
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
7	Carry out engine test run and check engine for leaks around the oil feed line (3)

 Turbocharger

Number	Designation			Engine 646.984/ 985 in model 906	Engine 646.989/ 990 in model 906


BA09.40-N-1003-01O	Bolt, oil feed line to turbocharger		Nm	18	18
BA09.40-N-1004-01O	Bolt, oil feed line to cylinder head		Nm	8	8

 Engine lubrication system

Number	Designation			Engine 646 in model 906 without particulate filter	Engine 646 in model 906 with particulate filter


BF18.00-N-1001-01L	Engine oil	Filling capacity (oil and filter change)	Liters	11	11
		Specifications for Operating Fluids	Sheet	BB00.40-P-0228-03A	-
			Sheet	BB00.40-P-0228-05A	-
			Sheet	BB00.40-P-0228-51A	BB00.40-P-0228-51A
			Sheet	BB00.40-P-0229-03A	-
			Sheet	BB00.40-P-0229-05A	-
			Sheet	BB00.40-P-0229-31A	BB00.40-P-0229-31A
			Sheet	BB00.40-P-0229-51A	BB00.40-P-0229-51A

Referenced documents

ar0910d803001sd Detach/attach air intake hose
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.