D09.40-A007-79
1 | Boost pressure positioner | 5 | Retaining ring | |
2 | Coolant line | 6 | Pull rod | |
3 | Coolant line | 7 | Bolts | |
4 | Electrical connector |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove coolant line (2) from boost pressure regulator (1). |
| |
2 | Remove coolant line (3) from the boost pressure regulator (1). |
| |
3 | Release and disconnect electrical connector (4). | ||
4 | Remove retaining rings (5) and remove pull rod (6). | ||
5 | Remove screws (7) and remove boost pressure regulator (1). | Installation: Replace screws (7). | |
Screw, boost pressure regulator to exhaust gas turbocharger | |||
6 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run. |
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar2020d0002tsm Remove/install coolant feed line for boost pressure regulator
- ar2020d1000tsm Remove, install coolant feed line for turbocharger
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.