1 | Air intake pipe |
2 | Clip |
S09.10-4524-11
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove hot film mass air flow sensor (B2/16). | ||
2 | Loosen clamp (2). | ||
3 | Check clamp (2). | If the clamp (2) is damaged, | |
| |||
Replace clamp (2). | |||
4 | Remove air intake pipe (1). | ||
5 | Install in the reverse order | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform engine test run. While doing so, check engine for proper operation and leak tightness. |
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ar0707s1455ef Remove/install hot film mass air flow sensor
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as4900z000101a Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust.