B09.10-0072-08
1 Metal turbocharger intake tubing
2 Air filter
3 Flexible air filter output hose
4 Air compressor intake hose
5 Support
5.1 Fastening screws
6 Flexible connection tubing to turbocharger
7 Fastening clamps for tubing
| Remove and install | ||
Danger! | Risk of accident by involuntary vehicle movement with engine running. Risk of injury by compression and burning due to contact during engine start operation or contact with running engine | Chock vehicle to prevent involuntary movement. Wear tight and closed working clothes. Do not touch hot and moving components. | |
1 | Disconnect negative battery cable. | Loosen the screw of the negative cable at the frame rail, avoid loosening at the battery terminals. | |
2 | Tilt the cab. | ||
3 | Loosen fastening clamps and remove flexible output hose (3) from air filter (2). | Installation: Check condition of hose and fastening clamps, replace as necessary. | |
4 | Loosen fastening clamp and disconnect intake hose (4) from air compressor. | ||
5 | Remove both screws (5.1) from support (5). | ||
6 | Loosen both fastening clamps (7) at turbocharger intake (8), remove metal tubing (1) and flexible tubing (6). | Installation: Check condition of fastening clamps and flexible tubing, replace as necessary. | |
| |||
7 | Close turbocharger intake connection | Use a suitable plastic plug. | |
8 | Install in reverse order. | Installation: Make sure all tubings and hoses are perfectly clean. | |
9 | Check air filter condition. | Replace filter element. | |
10 | Start engine and verify leak tightness. |
Charge air pipe/charge air cooling
Referenced documents
- ar6080b0010a Tilt cab to repair position, tilt back
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.