Remove/install throttle valve actuator

AR07.51-P-1401RX

Remove/install throttle valve actuator

9.1.06

 

Remove/install



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Turn key in ignition switch to position "0".

 Vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until ignition is switched off.

2

Remove air filter housing

AR09.10-P-1150RX

3

Remove hot film mass air flow sensor (B2/5)

AR07.07-P-1453RX

4

Remove air guide housing (1)

5

Release and disconnect the electrical connector at the throttle valve actuator (M16/6)

6

Pull bleed hose (2) out of throttle valve actuator (M16/6)

7

Unscrew bolts (3) and remove throttle valve actuator (M16/6)



*BA07.61-P-1001-01D

8

Remove gasket (4)

 Installation: Replace gasket (4). Attach gasket (4) to the resonance intake manifold (arrow).

9

Install in the reverse order

10

Read out fault memory

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Number

Designation

Engine 272

Engine 273

BA07.61-P-1001-01D

Bolt connecting throttle valve actuator to resonance intake manifold

Nm

9

9

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00