S07.17-4516-08
1 | Nut | 3 | Electrical connector | |
2 | Vacuum hose | Y77/11 | Boost pressure control pressure transducer |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove engine charge air duct on ATL |
| |
2 | Unscrew nuts (1) | M6 | |
3 | Remove boost pressure control pressure transducer (Y77/11) | ||
4 | Remove vacuum hoses (2) | Installation: Observe assignment vacuum hoses (2) relative to the respective connections on boost pressure control pressure transducer (Y77/11). | |
5 | Remove boost pressure control pressure transducer (Y77/11) | To do this disconnect electrical connector (3). | |
6 | Install in the reverse order | ||
7 | Connect diagnostic system and read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Delete fault memory if necessary. | |||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check for leak tightness with engine running | Visual inspection only. |
Referenced documents
- ad0000s200004e Connect STAR DIAGNOSIS and read out fault memory
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ar0941s8622ef Remove, install engine charge air channel at turbocharger
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.