AR07.13-P-6830C | Remove/install injection nozzles (DE) | 15.1.10 |
ENGINES 602.982 in MODEL 210.017 /217
ENGINES 602.983 in MODEL 461
P07.13-2028-05
Shown on engine 602.982
50/6 Nozzle disk
51 Injection nozzle
51/16 Clamp
51/17 Screw
55 Injection line
90/3 Fuel leak hoses
L9 Needle motion sensor connector
Modification notes
| Remove/install | ||
1 | Remove charge air pipe | ||
2.1 | Removing cylinder head cover dust shield | Only on model 210. Pay attention to installation position of arresting sleeve | |
3 | Disconnect or unclip fuel leak hoses (90/3) | ||
| Leak oil line connection to injection nozzle changed to plug connection | Engine 602 | |
4 | Unscrew injection lines (55) from injection nozzles | Disconnect needle motion sensor (L9) from no. 2 cylinder. | |
| |||
5 | Remove injection nozzle (51) clamps (51/16) and remove injection nozzles | Installation: Insert injection nozzles with special grease. Replace clamp (51/16), screw (51/17) and nozzle disk (50/6) | |
| |||
6 | Testing injection nozzles | Engine 602.982 see diesel engine diagnosis manual volume 1.1 Register B9 | |
7 | Install in the reverse order |
Injectors, injection valves, lines
Number | Designation | Engine | ||
BA07.03-P-1001-01A | Injection line | Nm | 27 | |
BA07.03-P-1002-01A | Injection nozzle | Stage 1 | Nm | 7 |
Stage 2 | ° | 180 | ||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1036-06A | Special grease | A 001 989 42 51 10 |
Referenced documents
- bt0703p000102a Connection of leak oil line to injection nozzles modified to plug-type connection