ar0713d841002b

Basic setting of distributor-type injection pump

Type ar · topic 07.13 · version 0100 · 1997-07-23

Applies to: ENGINE 602.984 in MODEL 667, 668, 670 ENGINE 602.985 in MODEL 668, 670

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.13 Diesel injection system distributor pump (DFI, EDC) — Series 602 (models 984, 985) · Series 667 · Series 668 · Series 670

EinPAS 15 Engine › 15.45 Engine management › 15.45.51 Injection pump/injection timer — Series 602 (models 984, 985) · Series 667 · Series 668 · Series 670

AR07.13-D-8410-02B

Basic setting of distributor-type injection pump

Engine 602.984/985

Basic setting of distributor-type injection pump

D07.13-0084-01

1 Check position of the engine (10° BTDC of cylinder 1), adjust to correct setting if necessary.

Basic setting of distributor-type injection pump

D07.13-0082-01

2 Rotate injection pump shaft so that the marking (gap) in the teeth of the driver points toward the connection of the injection pipe for cylinder 1.
After this, rotate injection pump shaft to the right as far as the pressure point and push coupling sleeve onto the driver.