1 | Electrical connection |
2 | Union nut |
3 | Electrical wiring harness |
B16/15 | Temperature sensor downstream of exhaust gas recirculation cooler |
S07.04-4623-06
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Raise vehicle | ||
2 | Remove electrical connection (1) from bracket | ||
3 | Disconnect electrical connection (1) and expose electrical wiring harness (3) | Installation: Check for a correct installation position. | |
4 | Unscrew union nut (2). | Nut for exhaust gas recirculation cooler temperature sensor | |
5 | Remove temperature sensor downstream of exhaust gas recirculation cooler (B16/15) | ||
6 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- ar0060s1000e Lift/jack up vehicle
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.