AR07.04-P-0071FF | Remove/install exhaust gas temperature sensor | 9.3.10 |
ENGINE 639.9 in MODEL 454.0 with CODE (K13) Diesel particulate filter
P07.04-2488-05
1 Wiring harness
2 Bracket
3 Tie strap
B19/11 Temperature sensor upstream of turbocharger
B19/11x1 Temperature sensor connector upstream of turbocharger
| Remove/install | ||
1 | Remove trim panel of cylinder head cover | ||
2 | Disconnect temperature sensor connector upstream of turbocharger (B19/11x1) | ||
3 | Remove cable binder (3) and detach wiring harness (1) for temperature sensor upstream of turbocharger (B19/11) from bracket (2) | ||
4 | Remove temperature sensor upstream of turbocharger (B19/11) from exhaust manifold | | |
Installation: Coat temperature sensor upstream of turbochargerB19/11) with heat-resistant lubricant before installing. | |||
Paste | |||
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
6 | Carry out engine test run and in doing so, check exhaust system in the area of the temperature sensor upstream of turbocharger (B19/11) for leaks | ||
7 | Read fault memory, erase if necessary | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Sensors
Repair materials
Number | Designation | Order number |
BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DB supply specification 6879.20 | A 000 989 76 51 |
Referenced documents
- ad0000p200004ff Connect STAR DIAGNOSIS, read out fault memory
- ar0120p5015ff Remove/install cylinder head cover trim panel
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.