1 | Securing clamp |
2 | Leak oil line |
P07.16-2687-06
| Remove/install | ||
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
1 | Remove vacuum reservoir | ||
2 | Detach leak oil line (2) (arrow) | ||
3 | Remove safety clips (1) | ||
4 | Pull leak oil line (2) out of the injectors | ||
Notes about Common-Rail components | |||
Installation: Install new sealing rings of the leak oil line (2). | |||
5 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform engine test run and check fuel system in the area of the leak oil line (2) for leak tightness |
Referenced documents
- ah0716p000201tx Notes about Common-Rail components
- ar0709p0001ff Remove/install pressure reservoir
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.