Remove/install slide rail in cylinder head · ar0510d8432d · Mercedes-Benz WIS

AR05.10-D-8432D

Remove/install slide rail in cylinder head

27.10.09

ENGINES 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINES 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINES 611.983 in MODEL 690.6

D05.10-1103-06

1 Slide rail

2 Driver

3 Front cover

4 Intake camshaft sprocket

5 Retaining pin

A Bore

	Remove/install
1	Position piston of cylinder 1 to ignition TDC	 Rotate engine at crankshaft in clockwise direction. Do not crank engine at camshaft and do not crank back.
2	Lock inlet camshaft		*111589031500
		 Insert retaining pin (5) at 1st camshaft bearing into the hole (A) in the sprocket of intake camshaft (4)
3	Remove front cover (3) at cylinder head		AR01.30-D-5700D
4	Unbolt driven plate (2) at intake camshaft	17 mm hexagon socket 3/8 inch square
			*BA05.20-P-1002-01F
5	Take off top slide rail (1)
6	Install in the reverse order

Camshaft

Number	Designation		Engine 611.960/961/962/980/ 981/983/987 612.961/962/963/965/ 966/967/981/990 613.960/961


BA05.20-P-1002-01F	Bolt, driver to inlet camshaft	Nm	50

111 589 03 15 00

Retaining pins