ar0330d5000us

Remove/install retaining lock for crankshaft / ring gear

Type ar · topic 03.30 · version 0101 · 2012-05-11

Applies to: ENGINE 272.979 in MODEL 906

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 906

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 906

Also applies to engines/gearboxes: 272 979

AR03.30-D-5000US

Remove/install retaining lock for crankshaft / ring gear

7.5.12

ENGINE 272.979 in MODEL 906

Remove/install retaining lock for crankshaft / ring gear

D03.30-1126-09

1 Retaining lock

2 Cover

5 Screw

6 Bracket

3 Nut

4 Bolts

Remove/install

1

Lift/jack up vehicle

AR00.60-D-1000H

2

Remove bolt (5) on transmission housing

*BA27.40-N-1001-01G

3

Counterhold nuts (3) and remove bolts (4) on transmission housing

Press bracket (6) with lines to one side while removing the lower bolt (4).

*BA27.40-N-1001-01G

4

Unclip cover (2)

5

Insert retaining lock (1) into starter opening

The retaining lock (1) must engage in ring gear of the clutch plate; crank engine at crankshaft in direction of engine rotation if necessary.

*112589034000

6

Install in the reverse order

Housing

Number

Designation

Transmission
722.683/684/685/686

BA27.40-N-1001-01G

Bolt, transmission housing to crankcase

Nm

38

Remove/install retaining lock for crankshaft / ring gear

Retaining lock

112 589 03 40 00

Referenced documents