1 | Radial shaft sealing ring |
2 | Assembly tool |
S03.20-4516-06
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Remove belt pulley | ||
2 | Remove radial shaft sealing ring (1) from the quick-release coupling through twisting counterclockwise | The assembly tool (2) for removal/installation if the radial shaft sealing ring (1) is a component part of the scope of replacement parts. | |
Radial shaft sealing ring in timing case cover | |||
3 | Install in the reverse order | ||
| Check | ||
4 | Check engine oil level; correct if necessary | ||
| Low SPAsh multigrade service engine oils (specification 228.51) | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Check for leaktightness with engine running | Visual inspection only. |
Referenced documents
- ar0330s1700ef Remove/install belt pulley
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- bb0040p022851a Low SPAsh multigrade service engine oils (specification 228.51)