ar0320d3000us

Replace front crankshaft radial sealing ring

Type ar · topic 03.20 · version 0100 · 2007-08-17

Applies to: ENGINE 272.979 in MODEL 906

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 906

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 906

Also applies to engines/gearboxes: 272 979

AR03.20-D-3000US

Replace front crankshaft radial sealing ring

1.8.07

ENGINE 272.979 in MODEL 906

Replace front crankshaft radial sealing ring

D03.20-1113-08

1 Crankshaft radial seal

2 Timing case cover

4 Vibration damper

3 Crankshaft

	Removing
1	Remove vibration damper (4)		AR03.30-D-1600US
2	Lever crankshaft radial sealant ring (1) out of timing case cover (2) using a suitable tool	 Do not damage crankshaft (3) and mount for the crankshaft radial sealing ring (1) in the timing case cover (2). Use a clean rag as a base when prying out.
	Install
3	Install crankshaft radial sealing ring (1)		AR03.20-D-3000-01US
			*606589001400
4	Install vibration damper (4)		AR03.30-D-1600US
	Checking
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
5	Carry out engine test run and check engine for leaks in area of crankshaft radial sealing ring (1)

Replace front crankshaft radial sealing ring

Sleeve

606 589 00 14 00

Referenced documents

ar0320d300001us Install front crankshaft radial seal
ar0330d1600us Remove/install belt pulley/vibration damper
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.