ar0120b5014d

Remove/install cylinder head cover

Type ar · topic 01.20 · version 0101 · 2016-02-12

Applies to: Cumbustion engine 374, 376, 386 with Vehicle 364.### #C, 364.### #B, 364.### #D, 382.### #C, 382.### #B, 382.### #D, 384.### #C, 384.### #B, 384.### #D, 386.### #C, 386.### #B, 386.### #D, 682.### #C, 682.### #B, 682.### #D, 684.### #C, 684.### #B, 684.### #D, 688.### #C, 688.### #B, 688.### #D, 693.### #C, 693.### #B, 693.### #D

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.20 Crankcase ventilation, cylinder head cover — Series 364 · Series 374 · Series 376 · Series 382 · Series 384 · Series 386 · Series 682 · Series 684 · Series 688 · Series 693

EinPAS 15 Engine › 15.16 Cylinder head › 15.16.30 Cylinder head cover — Series 364 · Series 374 · Series 376 · Series 382 · Series 384 · Series 386 · Series 682 · Series 684 · Series 688 · Series 693

AR01.20-B-5014D

Remove/install cylinder head cover

12.02.16

Cumbustion engine 374, 376, 386 with Vehicle 364.### #C, 364.### #B, 364.### #D, 382.### #C, 382.### #B, 382.### #D, 384.### #C, 384.### #B, 384.### #D, 386.### #C, 386.### #B, 386.### #D, 682.### #C, 682.### #B, 682.### #D, 684.### #C, 684.### #B, 684.### #D, 688.### #C, 688.### #B, 688.### #D, 693.### #C, 693.### #B, 693.### #D

Remove/install cylinder head cover

B01.20-0007-11

1 Cylinder head cover

2 Crankcase pressure regulating valve (PCV)

3 Cover fastening bolts

4 Cylinder head retightening compound

5 Oil filler tube

6 Cover gasket

Remove and install

Danger!

Risk of personal and material damage when tilting and returning the engine hood.

Make sure that the tilting and tilt-back area is free of objects and people. Tilt hood and lock it with safety rod. Tilt back the hood cover to its correct service position lock-in.

AS88.40-B-0001-01A

1.1

Tilt the engine hood.

Trucks with semi forward cabin

AR88.40-B-1000A

Danger!

Risk of personal and material damage when tilting and returning the vehicle cab.

Make sure that the tilting and tilt-back area is free of objects and people. Tilt the cabin until the safety rod locks it in its final position. Tilt back the cabin to its correct service position lock-in.

AS60.80-B-0001-01A

1.2

Tilt the cab.

Trucks with semi-advanced cab.

AR60.80-B-0010A

1.3

Open engine compartment cover

Bus.

2

Clean the engine top part

3

Disconnect the hose of the crankcase pressure regulating valve pipe (2)

4

Remove the bolts (3) with the plain washers

Installing: Tighten the bolts equally and alternately.

*BA01.20-B-1001-01A

5

Remove the cover (1) and the gasket (6).

Installing: Apply a new cylinder head gasket, observing that the mating surfaces cleanliness.

6

Install in reverse order

Crankcase ventilation, cylinder head cover

Número

Denominação

372.9 engine; 374.9; 376.9; 377.9; 386.9

BA01.20-B-1001-01A

Head cover bolt

Nm

25

Referenced documents