ar0100p0200mnl

Inspect cylinders with a light probe

Type ar · topic 01.00 · version 0200 · 2019-08-23

Applies to: Engine 176, 177 in model 217, 222

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 176 · Series 177 · Series 217 · Series 222

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 176 · Series 177 · Series 217 · Series 222

AR01.00-P-0200MNL

Inspect cylinders with a light probe

08.08.2019

Engine

176, 177 in model 217, 222

Modification notes

05.08.2019

Information document AH05.30-P-1000-02SZ, added.

Operation step 7.

Inspect cylinders with a light probe

Shown on engine 176 in model 222

1

Endoscope

P01.00-3738-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove spark plug at cylinder to be checked.

AP15.10-P-1580C

2

Remove center and front bottom engine compartment lining.

AR61.20-P-1105LF

3

Turn engine at center bolt of the crankshaft in the direction of engine rotation until the piston of the cylinder to be checked is at bottom dead center (BDC).

Ring wrench

*177589000300

4

Connect endoscope (1) and insert endoscope optics through spark plug bore into cylinder to be checked.

000 588 01 21 00 Endoscope

WS01.00-P-0097B

5

Check cylinder barrels.

General information on checking valves, valve seats and valve guides

AH05.30-P-1000-02SZ

General information on inspecting cylinder walls

AH01.00-P-0300-01AMG

If there is 'scoring' (wear to the cylinder), the cylinder barrel has become rough and honing marks are no longer visible.

If the condition of the cylinder barrels is not clearly recognizable,

Remove the relevant cylinder head.

Left cylinder head
Engine 177 in model 217, 222

AR01.30-P-5770MNM

Left cylinder head
Engine 176 in model 217, 222

AR01.30-P-5770MNL

Right cylinder head
Engine 177 in model 217, 222

AR01.30-P-5780MNM

Right cylinder head
Engine 176 in model 217, 222

AR01.30-P-5780MNL

6

Install in the reverse order.

Inspect cylinders with a light probe

177 589 00 03 00

Ring wrench

Referenced documents