ar0100p0200gd

Inspecting cylinders with light probe

Type ar · topic 01.00 · version 0105 · 2006-07-26

Applies to: ENGINE 668.940 /941 /942 in MODEL 168 ENGINE 668.914 in MODEL 414.700

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 168 · Series 414 (models 700) · Series 668 (models 914, 940, 941, 942)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 168 · Series 414 (models 700) · Series 668 (models 914, 940, 941, 942)

AR01.00-P-0200GD

Inspecting cylinders with light probe

20.5.97

ENGINE 668.940 /941 /942 in MODEL 168

ENGINE 668.914 in MODEL 414.700

Inspecting cylinders with light probe

P01.00-0482-06

Shown on model 168

1.1 Cylinder inspection equipment

1.2 Inspection probe

Y76 Fuel injector

Remove/install

General notes on removing, installing injectors

Engine 611.960/961/962/981/987, 612.961/962/963/981, 613.960/ 961, 628.960, 668.914/940/941/942

AH07.16-P-1000-01A

1

Remove fuel injectors (Y76)

Clean injector stems and injector recesses.
Injectors must not be disassembled.

Model 168

AR07.16-P-1000GD

Model 414.600/700

AR07.16-L-1000VA

2

Withdraw ignition key

to avoid starter being operated unintentionally.

3

Position piston of cylinder to be inspected to BDC

Rotate engine at crankshaft, if necessary.

4

Connect cylinder inspection equipment (1.1) and insert inspection probe (1.2) of the inspection equipment into the injector bore

*WH58.30-Z-1014-05A

*WH58.30-Z-1006-05A

*WH58.30-Z-1007-05A

Inspecting

General information on inspecting cylinder walls

Distinguish between "visual streaks" and "scoring".

In cases of doubt:

AH01.00-N-0300-01A

5

Inspect cylinder walls in the same way

Remove cylinder head

Model 168

AR01.30-P-5800GD

Model 414.600/700

AR01.30-L-5800VA

6

Install in the reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1006-05A

Flexible endoscope, package contents 1 (complete unit),

Firma Richard Wolf GmbH D-75438 Knittlingen

Firma Karl Storz GmbH D-78532 Tuttlingen

WH58.30-Z-1007-05A

Flexible endoscope package contents 2 (for workshops which already have an approved endoscope from the Wolf or Storz company),

Firma Richard Wolf GmbH D-75438 Knittlingen

Firma Karl Storz GmbH D-78532 Tuttlingen

WH58.30-Z-1014-05A

Cylinder inspection equipment

Referenced documents