Check, adjust low beams · ap8210p8263fa · Mercedes-Benz WIS

AP82.10-P-8263FA

Check, adjust low beams

06.12.2018

Model	167
	with code 631 (Static LED headlamps, left-hand traffic)
	except code 460 (Canada version)
	except code 494 (US version)
Model	167
	with code 632 (Headlamps, LED, static, right-side traffic)
	except code 460 (Canada version)
	except code 494 (US version)

Shown on model 167.121

01	Headlamp aimer
E1	Left front lamp unit

P82.10-A039-12

Static LED headlamp with halogen high beam, ECE version, shown on model 167

E1	Left front lamp unit
E1e2	Left low beam

P82.10-A033-01

Static LED headlamp, shown on model 167

E1	Left front lamp unit
E1e2	Left low beam

P82.10-A034-01

Shown on general headlamp range controller

6	Headlamp range controller

P82.10-8410-01

Light gradient for low beams

1	Light-dark boundary
2	Reference line for height adjustment
3	Central mark
4	Reference line for lateral setting

P82.10-7553-76

Shown on model 167.119

H	Height adjusting screw
S	Side position adjusting screw

P82.10-A036-01

 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	General information on checking/correcting headlamp adjustment		AH82.10-P-1000-01A
	Preparatory activity
1	Check function of headlamp range adjustment.	On vehicle with a headlamp range adjuster (6).
			AP82.10-P-8250EW
2	Prepare vehicle for checking/correcting headlamp adjustment.		AP82.10-P-8260-10L
3	Determine degree of inclination for main headlamps.
	Notes on determining headlamp aiming values		AH82.10-P-1005-01A
		 The degree of inclination for the main headlamps is specified on the model plate on the B-pillar on the passenger side.
4	Adjust specified degree of inclination for main headlamps at headlamp adjuster (01).
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
5	Switch on low beams.
6	Open hood.
	Check and, if necessary, adjust (checking and adjusting the low beams is described at the left low beam (E1e2) in the left front lamp unit (E1), use procedure for left side for right side too.)
7	Check height adjustment of left low beam (E1e2), adjust if necessary.
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
		 For a low beam light gradient with the correct height adjustment, the light/dark boundary (1) of the left low beam (E1e2) must be congruent with the datum line for height adjustment (2) in the headlamp adjuster (01) respectively to the left of the center mark (3), as shown in the color image. The colored area of the light-dark boundary (1) of the left low beam headlamp (E1e2) must be above the reference line for the height adjustment (2), as shown in the color image.
		If the height adjustment for the left low beam (E1e2) is correct,
		
		No further check necessary, continue with operation step 8.
		If the height adjustment for the left low beam (E1e2) is not correct,
		
		Turn the adjustment screw for the height adjustment (H) to correct the height adjustment of the left low beam headlamp (E1e2).
8	Check lateral adjustment of left low beam (E1e2), and adjust if necessary.
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
		 For a low beam light gradient with the correct lateral adjustment, the light/dark boundary (1) of the left low beam (E1e2) must be congruent with the datum line for lateral adjustment (4) in the headlamp adjuster (01) starting from the center mark (3) on the right, as shown in the color image. The colored area of the light-dark boundary (1) of the left low beam headlamp (E1e2) must be above the reference line for the lateral adjustment (4), as shown in the color image.
		If the lateral adjustment of the left low beam (E1e2) is correct.
		
		No further check is necessary; continue with operation step 9.
		If the lateral adjustment of the left low beam (E1e2) is not correct.
		
		Turn the adjustment screw for the lateral adjustment (S) to correct the lateral adjustment of the left low beam headlamp (E1e2).
	Finishing activity
9	Reset switch positions to input condition.	Only if the high beam setting is not to be checked afterwards.
10	Close hood.

Referenced documents

ah8210p100001a General information on checking/correcting headlamp adjustment
ah8210p100501a Notes on determining headlamp aiming values
ap8210p8250ew Check function of headlamp range adjustment
ap8210p826010l Prepare vehicle for checking/correcting headlamp adjustment
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
ws8200p0151b 000 588 11 21 00 Adjustment device