1 | Filler plug |
2 | Angle gear |
Seta | Drain plug |
B20.40-0014-11
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
1 | Open the rear engine hood | Note the instructions from bodybuilder. | |
2 | Remove the drain plug () and completely drain the oil | Catch the oil in an appropriate container and discard it according to the local laws. | |
3 | Install the drain plug (arrow) | Use a new sealing ring. | |
Bevel gear drain plug | |||
4 | Remove the filler plug (1) and fill with recommended lubricant oil | ||
5 | Fill the angular gear with recommended lubricant oil | Engines 457.907/927Quantity of lubricant for angular gear | |
6 | Install the filler plug | Use a new sealing ring. | |
Bevel gear filler plug | |||
7 | Run the engine and observe the tightness of plugs (1 and arrow) | ||
8 | Close the engine rear cover | Note the instructions from bodybuilder. |
Referenced documents
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.